Why LaserScript® toner cartridges are the BEST you can buy.


How do we rebuild a toner cartridge?

1. We dismantle your cartridges by removing the fasteners that were used during the assembly of the cartridge.

2. We clean the components and replace the drum and the wiper blade.

3. We re-assemble the cartridge and fill it with fresh pre-measured toner specifically manufactured for that cartridge/machine combination.

4. We finally test the cartridge for quality in our own machines, weigh it, and package it.


Why are ours better than our competition?

1. We NEVER use a saw to cut your toner cartridge in half in order to install a pull strip.

2. This can cause major tolerance issues. Clips added to hold the cartridge together can pop off and result in toner leakage in your machine.


Why our cartridges do NOT have a pull strip?

1. By not installing a pull strip we retain the integrity of the cartridge.

2. We can test the cartridge in our own machines allowing for full function testing of your cartridge.


Are there any drawbacks to using these non-destructive methods?

1. Yes, but not to you the customer.

2. It means that the cartridges cannot be shipped out of state.

3. It means we must continue to deliver the best cartridges you can buy carefully and directly to you using our friendly delivery people.


Why should you tell your friends and associates about us?

1. Don't keep us a secret! They will appreciate the money they will save!

2. We need to grow and can only do so locally.

3. To insure we stay in business so we can continue to service your cartridges using the highest quality people, methods and materials!



-John Wells VP



John is an Industrial Engineer from Virginia Tech and worked as a methods engineer for John Deere, Grumman and Newport News Shipbuilding.







LaserScript ®, is a registered trademark of Matrix Technology Incorporated, a Maryland Corporation

© Matrix Technology Inc. 2010, All Rights Reserved